Canadian flag waving against a blue sky
Nov 15, 2026
Information & Education

What Is an Order in Council in Canada?

By Travis Bader, founder of Silvercore Outdoors.

Last updated: 15 November 2026

An order in council is a legal instrument made by the Governor in Council. The Privy Council Office defines the Governor in Council as the Governor General acting by and with the advice and consent of the King's Privy Council for Canada, that is, Cabinet. An order in council is made under authority given by an Act of Parliament or, less often, under the royal prerogative. The responsible minister recommends it, and it takes legal effect only when the Governor General signs it. Orders in council made since 1990 are searchable in the federal Orders in Council database.

The Criminal Code and the Firearms Act give the Governor in Council the power to make firearms regulations, and Silvercore Club members get regulatory updates by email. See what the Silvercore Club includes.

What does order in council mean?

Order in council is often shortened to OIC. The Privy Council Office describes an order in council as a legal instrument made by the Governor in Council pursuant to a statutory authority. Each order carries a P.C. number, which the Orders in Council database writes in the format yyyy-nnnn, year first.

Some orders in council make regulations and some do not. The Privy Council Office publishes a process guide for Governor in Council submissions that are not regulations, and a separate guide covers regulatory submissions.

Who decides an order in council?

The responsible minister recommends it, and the Governor General signs it. The Privy Council Office says all orders in council are made on the recommendation of the responsible minister of the Crown and take legal effect only when signed by the Governor General. Since 2003, Treasury Board members have been responsible for approving regulations and most orders in council that need Governor in Council approval.

How is an order in council made and recorded?

The Privy Council Office process guide sets out these steps for a Governor in Council submission that is not a regulation.

  1. Drafting and ministerial recommendation. The department drafts the submission, consults the Treasury Board Secretariat and has Department of Justice legislative counsel review it for legality. The responsible minister then signs a ministerial recommendation.
  2. Review. The Privy Council Office checks the submission for completeness, sends a copy to the Treasury Board Secretariat, requests a final review by Department of Justice legislative counsel and distributes the proposal to Treasury Board members.
  3. Decision. Treasury Board members can approve the proposal, decline it, defer it or refer it to another Cabinet committee. Final approval occurs when they recommend approval to the Governor General and the Governor General signs the order.
  4. Coming into force. An order comes into force on the day the Governor General signs it unless it contains a specific effective date.
  5. Registration and publication. An order that is subject to the Statutory Instruments Act is registered and published in the Canada Gazette.
  6. Public posting. The Privy Council Office makes orders in council publicly available on the third working day after the Governor General approves them, and earlier in exceptional circumstances.

The Statutory Instruments Act sets the timelines for regulations. Under section 5, the authority that makes a regulation sends it to the Clerk of the Privy Council for registration within seven days. Under section 9, a regulation cannot come into force before the day it is registered, except in the cases that section sets out. Under section 11, a regulation is published in the Canada Gazette within 23 days after it is registered, subject to exemptions made under the Act.

What is the difference between an Act of Parliament and a regulation?

An Act is made by Parliament. A bill goes through first reading, second reading, committee study, report stage and third reading in one chamber, then the same steps in the other, and it becomes law when it receives Royal Assent from the Governor General.

A regulation is made by a person or body that Parliament has authorized in an Act, such as the Governor in Council or a minister. The Department of Justice explains that regulations are not made by Parliament, are developed under a separate process from Acts and are enforceable by law. The Statutory Instruments Act describes a regulation as an instrument made in the exercise of a legislative power conferred by or under an Act of Parliament.

The Canada Gazette shows the split. Part I carries notices and proposed regulations, Part II carries official regulations and Part III carries Acts of Parliament.

Where does firearms law use Governor in Council powers?

Section 117.15(1) of the Criminal Code reads: "Subject to subsection (2), the Governor in Council may make regulations prescribing anything that by this Part is to be or may be prescribed." The Part it refers to is Part III of the Code, Firearms and Other Weapons.

The definitions in section 84(1) refer to prescribed firearms. A prohibited firearm includes "any firearm that is prescribed to be a prohibited firearm", and a restricted firearm includes "a firearm of any other kind that is prescribed to be a restricted firearm".

The regulation that prescribes firearms as prohibited or restricted is the Regulations Prescribing Certain Firearms and Other Weapons, Components and Parts of Weapons, Accessories, Cartridge Magazines, Ammunition and Projectiles as Prohibited or Restricted, SOR/98-462. Its enabling Act is the Criminal Code, and the Justice Laws Website publishes its current consolidated text.

The May 2020 amendments to those regulations were made by order in council P.C. 2020-298 on 1 May 2020, registered as SOR/2020-96 the same day and published in Canada Gazette Part II, Volume 154, Extra Number 3. For the status of the Supreme Court of Canada appeals concerning that regulation, read Supreme Court firearms ban appeals explained. For the models it named, see our complete ban list of newly prohibited firearms.

The Firearms Act has its own regulation-making power. Section 117 opens with "The Governor in Council may make regulations" and lists the subjects, among them the revocation of licences, registration certificates and authorizations, the use of firearms in target practice or target shooting competitions, and shooting clubs and shooting ranges.

What the Silvercore Club gives a firearms owner tracking regulations

Silvercore Club members get regulatory updates by email. Members also have direct access to Silvercore staff. Every member in good standing carries individual third-party liability coverage to a limit of $5 million, placed through HUB International and underwritten at Lloyd's, for lawful firearms use, hunting, fishing, archery, camping and hiking across Canada and the United States. It sits on top of any personal liability policy you already hold. Membership is $59 a year, with or without a PAL. Join the Silvercore Club.

How do I look up an order in council?

  1. Open the Orders in Council database. The federal Orders in Council search covers orders made from 1990 to the present.
  2. Search by P.C. number if you have it. Enter it in the format yyyy-nnnn. P.C. 2020-298, for example, is entered as 2020-0298.
  3. Otherwise, narrow the search. You can search by date range, keywords, department, Act, chapter number and year, or bill number.
  4. Read the regulation itself. For an order that makes a regulation, read the version published in Canada Gazette Part II, then check the Justice Laws Website for the current consolidated text, which includes later amendments.

To get regulatory updates by email, join the Silvercore Club.

Frequently asked questions

What is an order in council in Canada?

An order in council is a legal instrument made by the Governor in Council, which is the Governor General acting by and with the advice and consent of the King's Privy Council for Canada, that is, Cabinet. It is made under authority given by an Act of Parliament or, less often, the royal prerogative, and takes legal effect only when the Governor General signs it.

What does OIC stand for in Canada?

OIC stands for order in council. Each OIC carries a P.C. number, which the federal Orders in Council database writes in the format yyyy-nnnn.

Who signs an order in council?

The Governor General. The responsible minister recommends the order, and the Privy Council Office says it takes legal effect only when the Governor General signs it.

Is an order in council the same as an Act of Parliament?

No. An Act is passed by the House of Commons and the Senate and becomes law on Royal Assent. An order in council is made by the Governor in Council under authority Parliament gave in an Act, and a regulation made by order in council is published in Canada Gazette Part II unless the Statutory Instruments Act exempts it.

How do I find an order in council?

Search the federal Orders in Council database, which covers orders made from 1990 to the present, by P.C. number, date, keywords, department or Act. For a regulation, read the text in Canada Gazette Part II and the current consolidated version on the Justice Laws Website.

The Silvercore Path

Join our Community

Subscribe for early access to product launches, news and events with the Silvercore Outdoors newsletter.

Mailing Address

354-5148 48th Ave
Delta, BC V4K 5B6

Training Facility

#115 - 7198 Vantage Way
Delta, BC V4G 1K7

Follow us on social

© 2026 Silvercore Advanced Training Systems Inc., operating as Silvercore Outdoors