Travis and Tiffany Bader at sunset beside a truck after a hunt
Nov 15, 2026
Information & Education

What Is Caping in Hunting? How to Cape for a Shoulder Mount

By Travis Bader, founder of Silvercore Outdoors.

Last updated: 15 November 2026

Caping is skinning the head, neck and shoulders of a big game animal to save that section of hide, called the cape, for a taxidermy mount. For a shoulder mount, you leave the throat uncut, cut the hide all the way around the body behind the shoulders, cut around each front leg and straight up its back side to meet that cut, then peel the cape forward to the head. Keep the cape cool and dry and get it to a taxidermist while it is fresh.

Every Silvercore Club member in good standing carries individual third-party liability coverage to a limit of $5 million for lawful hunting across Canada and the United States, on the hunt where you cape your first trophy and every one after it. See what the Silvercore Club includes.

What does caping mean?

In hunting, the cape is the hide from the front of the animal that a taxidermist needs to build a head or shoulder mount. The Missouri Department of Conservation says the skin needed most is from the front of the animal, including the legs, armpits and brisket. New Mexico State University's field care circular describes detaching the cape from the rest of the hide with a cut all the way around the rib cage just behind the shoulders. Caping is the work of cutting that section free and taking it off the carcass with the head.

When should you cape an animal, and when should you skin it for meat?

Cape the animal if you plan a head or shoulder mount. If the animal is meat only, there is no cape to save, and you skin and quarter it for the freezer.

Make the call before you field dress, because some cuts cannot be undone. NMSU's circular says that if your trophy is to be mounted, do not cut the animal's throat. The Missouri Department of Conservation says skinning the whole deer is not the answer, and recommends bringing the deer to the taxidermist before a meat processor does any caping. If you want the entire hide tanned in one piece, NMSU says not to cut the hide in half behind the shoulders.

Caping does not change your obligations for the meat. In BC, the edible portions still have to come out of the field, and the BC rules section below covers what that means.

How to cape a deer for a shoulder mount

These steps follow the Missouri Department of Conservation's trophy deer care guidance and NMSU's Field Care of Harvested Big Game. The Missouri guidance is written for deer, and NMSU's circular covers big game.

  1. Leave the throat alone. NMSU says not to cut the throat of an animal that is going to be mounted, because the cut can ruin the cape and cause the taxidermist additional work.
  2. Cut around the body behind the shoulder. The Missouri Department of Conservation says to begin about six inches (15 cm) behind the shoulder and cut all the way around the animal.
  3. Cut around each front leg. At the knee joint, cut around each leg. On the back side of the leg, cut straight up to the cut that circles the body. The Missouri guidance says to stay straight on the back of the leg and not stray into the armpit, brisket or shoulder.
  4. Open the neck. NMSU describes two ways. One runs a cut up the back of the neck for its entire length. The other uses a cut of 8 to 10 inches (20 to 25 cm) up the back of the neck, with the head detached first so it can be worked back through the opening. NMSU says the second way is easier for the taxidermist and often makes a better mount. If you can reach your taxidermist with the cape and head still attached, ask how they want the neck opened. With the second method, remove the head first as described in step 6.
  5. Peel the cape forward. Skin toward the head and remove as much skin as possible, leaving as little neck as practical. The Missouri guidance says to expect a few inches of neck inside the skin, and that a small hole is better than leaving excess tissue: a hole can be sewn, a spoiled skin cannot be saved.
  6. Remove the head. NMSU says to saw the head free from the neck just below the lower jaw. Without a saw, cut the neck muscles down to the bone and twist the head until the last vertebra comes free of the skull.

Skinning the face is detailed work around the eyes, lips and ears. If you will reach a taxidermist while the head is fresh, leave it to them. If you are days from help, NMSU says to take extra care around the eyes and the tear duct at the inside corner of the eye socket, leave as much lip tissue attached to the cape as possible, cut the ears off close to the skull, and turn them inside out with the cartilage still attached to the front of the ear.

How do you keep a cape cool and dry?

A cape has to stay cool, clean and dry. The Alaska Department of Fish and Game's bear hide guide says to keep the hide cool, clean and dry, to skin a bear immediately so heat leaves the hide and meat, and never to store a hide in plastic. It calls for game bags or burlap bags instead. NMSU says skinning greatly improves cooling in warm weather.

The Missouri Department of Conservation says aging the carcass comes after the cape and head are removed, and recommends taking the deer to the taxidermist first.

Should you salt or freeze a cape?

It depends on how soon you will reach a taxidermist.

Within reach of a taxidermist. The Missouri Department of Conservation says to let the taxidermist clean and salt the skin, because salt dries and hardens any meat left on it, and that meat becomes almost impossible to remove without cutting holes in the skin. It says the head is best delivered very fresh, and if it has to be frozen, keep it frozen a few weeks at most, because the eyelids, ear tips and nose pad can suffer freezer burn.

Far from a taxidermist. NMSU's circular says to remove all meat from the scalp, salt the hide liberally, roll it flesh side in and let it drain for 24 hours, then re-salt until all the moisture is gone and store it in a cool, dry place until it goes to the taxidermist. The Alaska guide specifies non-iodized salt and says not to freeze a hide once you have salted it.

BC rules that apply when you cape an animal

The 2026-2028 BC Hunting and Trapping Regulations Synopsis sets out what has to stay with the animal and what has to come out of the field. Read our summary of the BC hunting regulations for 2026-2028 for the wider changes.

Evidence of species and sex. The synopsis lists what must stay attached. For deer, that is the unskinned tail plus a testicle or part of the penis for a male, or a portion of the udder and teats for a female. For caribou, elk and moose, it is the tail or another readily identifiable part of the hide of at least 6 square centimetres, plus a testicle or part of the penis for a male, or a portion of the udder or teats for a female. For an animal taken in an antler or horn restricted season, you keep the antlers or horns naturally attached to a portion of the upper skull while returning from the hunt, together with your species licence and available for inspection by an officer. The synopsis says evidence of species and sex may be removed after the animal arrives at your normal dwelling place and is butchered and stored there for consumption, after it is taken to a meat cutter or the owner or operator of a cold storage plant, or after a qualified compulsory inspector has inspected it.

Compulsory inspection. Mountain goat, mountain sheep, caribou, cougar, and black bear in management units 6-12 and 6-13 must be submitted to a compulsory inspector within 30 days of the kill, except where the synopsis notes otherwise. Mountain goat and mountain sheep must be submitted within 30 days and before 5 December of the year of the kill, whichever comes first. For mountain sheep, the inspector needs the portion of the skull, preferably skinned, with the horns attached. The synopsis asks hunters to submit unfrozen parts and says you are not in legal possession of the animal until you comply.

Edible portions. The synopsis lists it as unlawful to kill wildlife, other than a fur-bearing animal that is not a black bear, and fail to remove the edible portions from the carcass to your normal dwelling place, a meat cutter or the owner or operator of a cold storage plant. Section 35 of the Wildlife Act ("Retrieval of wildlife killed") makes it an offence to kill or injure wildlife while hunting and fail to make every reasonable effort to remove the edible portions of the carcass of game to those places. For big game other than wolf, lynx, bobcat and wolverine, edible portions means the edible portions of the neck, ribs, four quarters and loins.

Paperwork for the taxidermist. The synopsis says taxidermists, tanners and meatcutters must keep records of their transactions, and that when you take parts of an animal to one of them, you must have documentation with you. That documentation includes your hunting and species licences, with the species licence appropriately cancelled, and the Compulsory Inspection Data Sheet where an inspection is required. If your taxidermist presents the parts for compulsory inspection on your behalf, you must give them all the information required for the inspection, including the location of the kill.

If you are working toward your first BC hunt, start with our guide to the BC hunting licence: cost and how to get one. Hunter education comes first, and our CORE course is where it starts.

What tools do you need to cape an animal?

A short, sharp blade for close work around the head is what hunters call a caping knife. NMSU says a sharp knife reduces accidental cuts and takes less effort. The Alaska Department of Fish and Game's field dressing guide lists a sharp knife or two, a bone saw or axe, and a knife sharpener. Add game bags or burlap bags for the cape, non-iodized salt if you will be days from a taxidermist, and latex or rubber gloves, which the BC synopsis says to wear when field dressing or handling any dead animal.

For more on getting an animal from the field to the table, listen to Jeff Senger on processing game meat on the Silvercore Podcast. If this will be your first animal, read moments after the shot and what to do after the shot is fired before you go.

What the Silvercore Club gives a hunter

Silvercore Club membership is $59 a year, and anyone can join, with or without a PAL. Every member in good standing carries individual third-party liability coverage to a limit of $5 million for lawful hunting, fishing and firearms use across Canada and the United States, on top of any personal liability policy you already hold. Partner discounts include 30% off Nanuk Cases online orders, 20% off regular-priced items at Outdoor Enterprise Canada on orders over $150 (one-time use per email), and optics pricing from Tenebraex (20%), SAI (15%) and Tangent Theta (10%). Members also get The Outpost, a private podcast, and live Q&A events with outdoor professionals. Join the Silvercore Club.

Frequently asked questions

What does caping mean in hunting?

Caping is skinning the head, neck and shoulders of a big game animal to save that section of hide, the cape, for a taxidermy mount. The cape is separated from the rest of the hide with a cut around the body just behind the shoulders.

Where do you cut to cape a deer for a shoulder mount?

The Missouri Department of Conservation says to start about six inches (15 cm) behind the shoulder and cut all the way around the animal, cut around each front leg at the knee, and cut straight up the back of each leg to meet the body cut. NMSU adds that you should not cut the throat of an animal you plan to mount.

Should I salt or freeze a deer cape?

If you will reach a taxidermist soon, the Missouri Department of Conservation says to let the taxidermist salt the skin and to keep a frozen head in the freezer a few weeks at most. If you are far from a taxidermist, NMSU says to remove all meat from the scalp and salt the hide liberally, and the Alaska Department of Fish and Game says not to freeze a hide once it is salted.

What is a caping knife?

A caping knife is a short, sharp blade used for the close work of caping around the eyes, lips and ears. NMSU says a sharp knife reduces accidental cuts and takes less effort.

What has to stay attached to a deer I cape in BC?

The 2026-2028 BC Hunting and Trapping Regulations Synopsis says the unskinned tail and evidence of sex, a testicle or part of the penis for a male or a portion of the udder and teats for a female, must stay attached until the deer arrives at your normal dwelling place and is butchered and stored there for consumption, is taken to a meat cutter or cold storage plant operator, or is inspected by a compulsory inspector.

Before your next hunt, join the Silvercore Club.

The Silvercore Path

Join our Community

Subscribe for early access to product launches, news and events with the Silvercore Outdoors newsletter.

Mailing Address

354-5148 48th Ave
Delta, BC V4K 5B6

Training Facility

#115 - 7198 Vantage Way
Delta, BC V4G 1K7

Follow us on social

© 2026 Silvercore Advanced Training Systems Inc., operating as Silvercore Outdoors